Panasonic CF-27 - Manual (Page 12)

starting Up/ShUtting Down
Basic Operation
CWheeO Indicates an operation applicable to the Microsoft® Intel!¡Mouse™ Wheel mode.
Coriginal) Indicates an operation applicable to the original mode.
Function Touch Pad Operation
Moving the Cursor CWheet^
(Originai) Move the tip of your finger
lightly over the surface.
Tapping/Clicking (Wheel)
(Original)
Double-Tapping/
Double-Clicking (Wheel)
(Original)
Dragging №ii)
(Original)
While holding down the
button, moving your fin­
ger on the work surface.
or
Two quick taps, but on
the second tap leaving
your finger down (apply­
ing pressure) and moving
it on the work surface.
• When a check mark is added for [use Drag
Lock] *
After the drag operation (above : left side), it is
necessary to determine the destination (i.e., loca­
tion of drop) by one tap. Under the condition no
destination is selected, do not use the suspend or
hibernation function. Nothing is shown on the dis­
play, even after resuming from the suspend or hi­
bernation mode.
In this case, the display will return after a tap or
click is made.
* In [StartI - [Settings] - [Control Panel) - (Mouse) - [Tap and Bunons]
Scroll*
Scroll a document
(rotate the wheel)
(Wheel)
(Original)
(Wheel) (Orig^^
Auto Scroll* (WhèèD
Automatically scroll a document
(move the mouse after clicking the
wheel)
Operate after pressing the two buttons simultaneously.
• When releasing the auto scroll function:
One tap on the work surface.