Starting up/shutting down, Handling the touch pad, Shutting down (power off your computer) – Panasonic CF-27 User Manual
Page 14: 1 display the shut down screen, 2 confirm shut down, Restarting your computer (without shutting down)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting Up/Shutting Down
X
note
)-
The double-tapping speed of the touch pad cannot be changed, even if the setting for [Double
click Speed] in [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons] is changed.
Handling the Touch Pad
• When using a key combination such así Fn ) + C F5l. do not touch the touch pad. If a key
combination is used while the pad is being touched, the function of the key combination
will not work. In addition, it is possible that control of the cursor will be lost and the cursor
will not show proper movements. In such cases, the computer has to be restarted by using
the keyboard (e.g.,[
• Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (i.e. nails), hard objects or objects leave marks (i.e. pencils and ball point pen).
• Do not allow things that could diny the touch pad, such as oil. The cursor may not work
properly in such cases.
• When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene or thinner, or disinfectant-type alcohol.
Shutting Down (power off your computer)
This procedure is shutting down without using the suspend or hibernation function.
(C
j
*
"Suspend/Hibemation Functions")
1
Display the shut down screen
After saving important data and closing each application, select [Shut Down] from the
[Start] menu.
note
}-
From the keyboard,
You may choose to press down on (
] , then select the menu with © or
2
Confirm shut down
Select (Shut down].
Your computer will power off automatically.
(In ihe OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer
consumes approximately 1.5 W.)
# Restarting your computer
(without shutting down)
Select [OK] after selecting [Restart].
T
noté
>
T
o
quickly resume computer operation after shutting down.
The suspend or hibernation function is available.
"Suspend/Hi-
bernation Functions")