O connect your computer to a power outlet – Panasonic CF-27 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Cover

(

2

) Lift open the cover holding both sides and remove it.

@ Put a battery pack into the computer and slide the battery pack inward until it is

firmly in place.

Latches

(7) Attach the cover holding both sides.

(

5

) Slide the latches.

• Be sure the battery pack is properly connected to the connector.

• Do not touch the battery connector on the computer. The computer may not

operate properly.

When attaching the cover;

Be careful not to get your fingers caught in the cover.

Cover o

I

o Connect your computer to a power outlet

Be sure the AC adapter is connected until completing Step 8 on page 9.

Handling the AC adapter

• Do not twist or pull the AC power cord forcefully. Doing so may damage the

connections.

• Use only the specified AC adii^pter with your computer. Using an AC adapter

other than the one supplied might damage the battery and/or the computer.

• When the DC plug is not connected to the computer, disconnect the AC cord

from your AC wall outlet.

• Problems such as sudden voltage drops/surges may arise during periods of thun­

der and lightning. Since this could adversely affect your computer, an
unintemiptible power source (UPS) is highly recommended unless the batteiy

pack is installed.

When closing the cover

First insert the top of the cover, then close the cover.

Advertising