How to clear a fax access code – Panasonic Panafax UF-766 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADVANCED FEATURES
How to Use the Machine After You Set a
Fax Access Code
1
Enter the fax access code.
Example: [US®® (The
entered code is not
displayed.)
‘START
16-APR-1992 16:00
AC-
f
16-APR'1992 15:00
16-APR-1992 15:00
00%
3
4
If the fax access code you just entered coincides with the
code set in the machine, the display "AC=" will
disappear. If not, the machine returns to standby.
You can now use the machine for any normal operation.
After you complete any operation, the machine will
return to standby. To use the machine again, re-enter
the fax access code.
16-APR-1992 15:00
AC-
0
Note: The department code(s) have a higher priority than the
fax access code. Therefore, if both fax access code and
department code(s) are set, you do not have to enter the fax
access code to operate the machine, the department code is all
that is required.
How to Clear a Fax Access Code
1
Enter the fax access code.
16-APR-1992 15:00
AC-
Example: ® ® ® ®
16-APR-1992 15:00
AC-U
<I> START
FUNCTION
USER PARAMETERS
repeatedly.
^START
Q
CLEAR
-
---------------- ^ START
FAX ACCESS CODE
1555
FAX ACCESS CODE
7
To return to standby
, ©STOP