Panasonic RQ-SX50V - Manual (Page 4)

Listening to the Radio
Memory presetting
{Available only from the main unit)
Frequencies of up to 20 radio sta­
tions {10 each for AM and FM) can
be stored in the memory.
Preparation
• Release the hold state.
•Connect the earphones {the cord
of the earphones acts as an FM
antenna) when storing frequen­
cies of FM stations in the memo­
ry-
■ Auto memory function
The frequencies in each band are
automatically stored in the memo­
ry In ascending order, starting with
the lowest frequency.
© Press RADIO/BAND to switch
on the power.
@ Press MODE to display
“MEMO".
(D Press and hold »AUTO.
The confirmation beep sounds
after each frequency is stored.
When “error" appears on the
display of the main unit:
Correct presetting may not be pos­
sible in cases where the broadcast
signals are too strong or too weak.
In such cases, carry out presetting
manually. (See following.)
9 Manual memory function B
© Press RADIO/BAND to switch
on the power, ©
@ Press MODE to - display
“MEMO”. ©
@ Press RADIO/BAND to select
the band. @
@ Press and hold MODE until the
displayed frequency flashes. @
( 5 ) Press + or - to select the
broadcast frequency. ©
® Press MODE so that “M” and
the memory number flashes. ©
® Press -I- or - to select the
memory number to store the @
frequency.
® Press MODE.
To erase an unnecessary
station from the memory
Press RADIO/BAND to switch
on the power.
Press MODE to display
“MEMO”.
Press RADIO/BAND to select
the band.
Press -t- or - to select the
memory number te be removed.
Press and hold MODE until the
displayed frequency flashes.
Press and hold MODE until “M”
and “--------” flashes.
Press MODE.
Listening operation Q
1 Connect the stereo earphones
and the remote control.
2 Release hold.
3
Press RADIO/BAND (main
unit) or press and hold the
main button (remote control)
to switch on the power.
Press MODE to display
“MEMO" (MEMO mode) or not
(free mode).
MEMO mode: To listen to a pre­
set station
Free mode: To listen to a de­
sired station (not
preset)
Press RADIO/BAND (main
unit) or the main button (re­
mote
control) to select the
band.
Each press changes the indica­
tion between AM and FM.
Press -f- or — to select the de­
sired station.
Memory number {only in the
MEMO mode) and broadcast
frequency changes.
7 Adjust the volume.
To turn off the radio:
Press ■ OFF (main unit) or press
and hold the main button (remote
control).