Panasonic MC-V7375 - Manual (Page 15)

Always operate the vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer.
1. Pull outward on
the dust cover grip,
located on the top of
the dust cover and
remove the cover.
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
r
■
CD
■
Go
CD
CD
2. To remove the dust
bag, grasp the cardboard
portion of the dust bag
and pull it out.
4. Fold the new dust bag
to clear the slots as shown
in illustration. Failure to do
so wilt prevent the
dust cover from clos*
ing properly. Attach
the new dust bag
onto the bag holder
by holding the
cardboard portion
and pushing back
as illustrated.
5. Reinsert the tab pro*
vided on the end of the
dust cover into the
grooves on №e dust com
partment to allow the
cover to rotate closed.
NOTE: The dust
cover must be com­
pletely and cor*
rectly installed for
proper opera­
tion.
6. Rotate the dust cover up
Into the closed position and
press into place.
NOTE: The dust bag should
not be caught between
the lower
edge of the
dust cover
and the
gasket as indi­
cated by the
arrow in the illus­
tration.
-
15
-