Windy Nation Rover Marine Grade User Manual
Page 8
8
Figure 3
Step 2: Before mounting the MG Rover Wind Turbine Frame to the tower, you should remove
the cable gland nut and the cable gland rubber grommet. This will make it easier to pass the
tower wires through the cable gland. Pick up the MG Rover Wind Turbine Frame and guide it
onto the 1.5 inch Schedule 40 Tower Pipe. If you are having difficulty guiding the three tower
wires through the cable gland, tie a piece of string to the three tower wires. Use this string to
help guide the tower wires through the cable gland. See Figure 3 above.
Figure 4
Step 3: After the MG Rover Wind Turbine Frame has been mounted on the tower, re-‐insert the
cable gland’s rubber grommet (if you removed it). Use a crescent wrench to firmly tighten the