MagnaFlow CHEVROLET CAMARO Stainless Cat-Back System PERFORMANCE EXHAUST - Manual (Page 3)

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [email protected]
Step 5. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front
to rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.
Step 4. Next attach the driver and passenger side
Muffler Assemblies to the Mid Pipe Assemblies using the
supplied 3.00" clamps and by fitting the hangers into the
rubber insulators. Complete the installation by re-installing
all the braces that were removed.