MagnaFlow AUDI TRUCK Q5 Stainless Cat-Back System PERFORMANCE EXHAUST - Manual (Page 3)

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [email protected]
Step 5. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front
to rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.
Step 4. Next install the P/S Muffler Assembly in similar
fashion as the D/S using the supplied 2.50" clamp and
inserting the hanger in to the rubber insulator.