Harbor Freight Tools Model 65903 - Manual (Page 3)

SKU 65903 For technical questions, please call 1-800-444-3353. Page 3
do not operate compressors in explosive atmospheres, such as in the pres- 2.
ence of flammable liquids, gases, or dust. Compressors create sparks which
may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a compressor.
3.
Provide barriers or shields as needed.
ELECTRiCAL SAFETY
Grounded compressors must be plugged into an outlet properly installed 1.
and grounded in accordance with all codes and ordinances. Never remove
the grounding prong or modify the plug in any way. do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. If the compressors should electrically malfunction
or break down, grounding provides a low resistance path to carry electricity away
from the user.
do not expose compressors to rain or wet conditions.
2. Water entering an elec-
tric motor will increase the risk of electric shock.
do not abuse the Power Cord.
3. Never use the Power Cord to pull the Plug
from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or
moving parts. Replace damaged Power Cords immediately. Damaged Power
Cords increase the risk of electric shock.
AN ExTENSiON CORd MuST
4. NEVER bE uSEd WiTH THiS iTEM. Connecting
this item to an outlet through an extension cord MAY CAuSE ELECTRiCAL
dAMAGE TO THE MOTOR and could present a FiRE HAzARd.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense during use. 1.
Do not use while tired or under the influence of drugs, alcohol, or medica-
tion. A moment of inattention while operating may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. Contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting.
3. be sure the Power Switch Lever is turned off
before plugging in. Plugging in compressors with the Power Switch Lever on,
invites accidents.
Remove adjusting keys or wrenches before turning the compressor on.
4. A
wrench or a key that is left attached to a rotating part of the compressor may result
in personal injury.
do not overreach. Keep proper footing and balance at all times.
5.