MagnaFlow DODGE DIESEL CUMMINS, 5in. HIGH-OUTPUT AL Custom Build Pipe Kit Diesel PERF. EXHAUST - Manual

Step 1: (Carefully read all instructions
before installation) To remove the OEM
exhaust system, you will need to loosen or
remove the clamps that fasten the system
together, including the V-band clamp at the
turbocharger. You can then disengage any
welded hangers from the OEM rubber
insulators and extract the system from the
vehicle.
Step 2: Before installing the new downpipe,
you will need to temporarily remove the
hanger bracket on the bellhousing that
attaches to the downpipe hanger as shown in
Diagram 2. Install the new downpipe by fitting
the OEM hanger bracket onto the downpipes
welded hanger, then remount the hanger
bracket and turbocharger V-band clamp.
Leave all clamps and fasteners loose for final
adjustment of the complete system. CC/SB
and EC/LB trucks will use the 42.62"
extension pipe only. CC/LB trucks will need
to add the 28" extension pipe between the
42.62" extension pipe and the delete pipe.
Install the required extension pipes, delete
pipe, and tailpipe pieces by fitting the welded
hangers into the OEM rubber insulators, and
by fastening the pipes together using the
supplied clamps as shown in the system
diagram.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
18920
2004.5 - 2007 Dodge Diesel - 5.9L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
Nov 29, 2012
Rev: 000
D/S HANGER
CLAMP (SHORTER)
P/S HANGER
CLAMP (LONGER)
D/S TAILPIPE EXTN. P/S TAILPIPE EXTN.
HANGER BRKT.
D/S TAILPIPE
P/S TAILPIPE
[5] 4.00" CLAMPS
DOWNPIPE
DELETE PIPE
28" PIPE
42.62" PIPE