360 Systems 2470SD Time Delay User Manual
Page 19
Operations
19
Setup Menu
Configure Network
Network parameters are set in the Configure Network dialog. In the Setup menu in the upper left
corner of the main window, select Network. Network communication for the Broadcast Time Delay
is designed primarily to support access to error logs and factory diagnostics.
Use only the NET1 connection on the rear panel to connect to the network. Make no connection to
NET2.
Configure Network dialog
Use the Configure Network dialog to configure network communication settings.
From the Main Menu selection bar at the top of the screen, select Setup>Network.
Each Broadcast Time Delay is shipped with a unique default network Host Name and IP Address.
Qualified network engineers may change these configurations to suit your specific network
environment. Factory defaults for networking are:
• Disable Network is checked
• Use DHCP is unchecked
• Manual DNS is unchecked
Disable Network Checkbox
This selection turns the network OFF or ON. The default is Disable.