360 Systems Short/Cut Editor - Manual (Page 43)

Editing Page 35
Shortcut 2000 Editor Owner’s Manual
ADJUST LEVEL
1. ADJUST NOW
2. 4 4 4 4 ADJUST BY: DB
SET OR ADJUST VALUE THEN PRESS ‘ENTER’
3. FADE IN TIME: 00.00 SEC
4. FADE OUT TIME: 00.00 SEC
+00.0
Use the S
CRUB W HEEL or the A RROW K EYS to adjust the value, or set it directly by
entering it with the numeric keys. The Space Bar changes the sign of the Adjust By value.
When you are finished, press E
NTER , then either press one of the numeric keys 2,3 or 4 to
select another value to adjust, or press 1 to execute the Adjust Level operation.
The F
ADE I N T IME and F ADE O UT T IME can be any value up to the length of the selected
region. Their combined total cannot exceed the length of the region, so if one is set to 1
second, the other can be up to 2 seconds if the range is 3 seconds long.
The graph below illustrates the result of adjusting the gain of a region that has already
been reduced to –4 db. In cases like this, the Adjust By value can go above +6 db because the
limit applies to the Gain Value that results from the operation
Adjust By = +8db
0db
+4db
- 4db
Set Gain Value
Set Gain Value sets the gain of all audio in the selected range to the specified Gain
Value. This is a way to set a known value that discards any previous gain setting . It is unique
in this regard as the other gain editing methods modify existing Gain Values. (This includes the
OUTPUT LEVEL parameter in the Edit Menu.)
FILES WITH ERRORS: 0
TOTAL FILES: 9
SET GAIN VALUE
GAIN VALUE: +00.0 DB
SPACE BAR CHANGES SIGN
SET OR ADJUST VALUE THEN PRESS ‘ENTER’
+00.0