ALFA NETWORK AIP-W525H - Manual (Page 18)

AIP-W525H
- 13 -
b) If the connection type detected is DHCP Client, the next screen will appear as shown in
Figure 3-9. You can then proceed with the wireless configuration.
Figure 3-9 Quick Setup - DHCP
c) If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-10.
Figure 3-10 Quick Setup - Static IP
 IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
 Subnet Mask - The Subnet Mask is used for the WAN IP address, usually
255.255.255.0.
 Default Gateway - Enter the gateway IP address into the box if required.
 Primary DNS - Enter the DNS Server IP address into the box if required.