ALFA NETWORK AIP-W525H - Manual (Page 28)

AIP-W525H
- 23 -
1. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select Static IP. The Static IP settings page will appear, shown in Figure 4- 7 .
 IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
 Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually 255.255.255.0.
 Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
 DNS 1 / DNS 2 / DNS 3 - (Optional) Enter one or two DNS addresses in dotted-decimal
notation provided by your ISP.
Click the Apply Changes button to save your settings.
2. If your ISP provides the DHCP service, please choose DHCP Client type, and the Router will
automatically get IP parameters from your ISP (shown in Figure 4- 8 ).
Figure 4-8 WAN – Dynamic IP
 Host Name – Enter the host name provided by your ISP, default value is blank.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default MTU Size unless required
by your ISP.
 Attain DNS Automatically – Receives DNS address automatically from the ISP.
 Set DNS Manually - If your ISP gives you one or two DNS addresses, select Set DNS
Manually and enter the primary and secondary addresses into the correct fields. Otherwise,
the DNS servers will be assigned dynamically from your ISP.