ALFA NETWORK AIP-W525H User Manual

Page 29

Advertising
background image

AIP-W525H

- 24 -

Note:

If you find an error message on the website after entering the DNS addresses, it is likely that

your DNS server has been set up improperly. You should contact your ISP to get DNS server

addresses.

3.

If your ISP provides a PPPoE connection, select PPPoE option and enter the following

parameters (Figure 4-9):

Figure 4-9

WAN - PPPoE

User Name/Password - Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.

Service Name - The service name should not be configured unless you are sure it is

necessary for your ISP.

In most cases, leaving these fields blank.

Connection Type

Continuous

Continuous connection type means to setup the connection through

PPPoE protocol whenever this WLAN Broadband Router is powered on.

Connect on Demand

In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established

when you attempt to access the Internet again.

Manual - You can click the Connect/Disconnect button to connect/disconnect

immediately. This mode also supports the Max Idle Time function as Connect on

Demand mode. The Internet connection can be disconnected automatically after a

Advertising