Audio Damage Ronin - Manual (Page 29)

29
Stereo Delay with Cross Feedback and Filtering
This preset demonstrates Ronin’s ability to set its delay times based on your VST host’s current tempo, and
how to use the signal matrix for creating filtered delay and stereo delay effects.
Look first at the Routing Matrix section. There are no connections in the modulation matrix, so the LFOs,
envelope follower, and MIDI have no effect. In the signal matrix, you can see that the left and right inputs are
connected to the first and second delay modules, respectively. Each delay’s output is connected to a filter’s
input, and the filters are connected to the plug-in’s two output channels. Hence signals pass first through the
delays, then the filters, then out of the plug-in. Since we’re using separate delays and filters for each channel,
this is a “true stereo” processing configuration.