Saving presets via midi, Save one mix preset via midi – Aviom A-16R/A-16CS User Manual

Page 60

Advertising
background image

51

A-16R P

eRsonAl

M

ixeR

And

A-16Cs C

ontRol

s

uRfACe

u

seR

G

uide

transmitted as a single data dump.

The A‑16R can receive the following sysex data types:

Single Preset files ‑ saved mix information is loaded into

the current mix state.
All Preset files ‑ the A‑16R’s current sixteen mix Presets are

replaced with the data from a set of sixteen saved Presets.

The A‑16R is capable of saving and restoring Presets via MIDI only when the

front panel R

emote

/l

ocal

switch is in the l

ocal

position. In the R

emote

position,

MIDI communication is disabled.

P

N

ote

: The MIDI Thru jack will always echo data appearing at the MIDI In

jack regardless of the position of the R

emote

/l

ocal

switch.

Saving Presets via MIDI

The A‑16R can save Preset information to its internal memory or via MIDI

SysEx any time it is in Save Mode. The A‑16R Save Mode is entered by holding

down the R

ecall

and G

Roup

buttons simultaneously. Holding the R

ecall

and

G

Roup

button combination flashes the Recall and Group LEDs to indicate that

you can save Presets.

To save a Preset to internal memory, you press a numbered Channel button

to store the current mix at the selected location.

To save a Preset or group of presets via MIDI, the S

olo

and m

ute

buttons are

used in combination with the R

ecall

and G

Roup

buttons.

Save One Mix Preset via MIDI

To save the current mix as a Preset via MIDI SysEx:

Recall a Preset (or edit a Preset to create a new mix)

1.

including volume, pan, mutes and groups for up to sixteen

channels of audio as required. Editing can be done from

the front panel of the A‑16R or from the optional A‑16CS.
Set the A‑16R front panel

2.

Remote/Local switch to the l

ocal

(MIDI On) position.
Set up your

3.

MIDI recording device so that it is ready to

receive MIDI SysEx data.
Hold the

4.

R

ecall

and G

Roup

buttons down to enter Save

Mode.
While still holding the

5.

R

ecall

and G

Roup

buttons, press

the S

olo

button. (After pressing the S

olo

button, you can

release the R

ecall

and G

Roup

buttons.)

The current mix is sent out from the A‑16R to the

6.

MIDI

Advertising