Aviom 6416i - Manual (Page 65)

29 r
eAr
P
ANel
F
eAtures
Rear Panel Features
All 6416i rear‑panel features and functions are described in this section.
AC Power
Pro64 modules use switching power supplies that can operate at 100‑240V
and from 50‑60Hz, meaning that they can be used with most of the world’s
AC power systems by simply changing the line cord. The 6416i is equipped
with a standard grounded IEC power inlet (with fuse), which can accept the
interchangeable IEC power cord.
Fuse
The fuse holder is spring‑loaded and has space for two fuses, one main and
one spare (optional). Press the fuse holder cover to access the fuse. When
checking or replacing a fuse, always power off the Pro64 unit and remove the
line cord from the AC power source.
Always replace the fuse with one with the same rating as that being
changed.
A-Net Ports
Two EtherCon jacks are provided for A‑Net connections, labeled A and B.
Connections can use standard RJ45‑style cables or cables outfitted with
the locking EtherCon connector. Refer to the section on network modes for
additional information about using these jacks.
Balanced Line-Level Inputs
The sixteen female XLR line‑level input jacks on the 6416i can accept +4dBu
balanced or unbalanced audio signals. To use a mic‑level signal, a Pro64 mic‑
level module or a stand‑alone mic preamp is required.
6416i inputs accept balanced or unbalanced line-level signals.