Aviom 6416i - Manual (Page 84)

12 s
PeciFicAtioNs
Specifications
Audio Channels 16, line‑level
XLR Input (line level) Pin 1: Ground; Pin 2: Hot ; Pin 3: Cold ;
balanced
Audio Thru 2 DB25 connector, passive split;
Analog audio pinout on DB25
Alternate Inputs DB25 can be used as alternate audio input
DB25 connector Thread size is #4‑40 UNC
Audio Metering 3 LED: Green ‑40dB; Yellow ‑10dB; Red 0dB
A-Net I/O 2 EtherCon RJ45 connectors
Sample
Rates
A/D 44.1/48kHz; 88.2/96kHz; 176.4/192kHz
Sample Rate Range,
Pro64
1x 44.1/48kHz, 39.7kHz to 52kHz
2x 88.2/96kHz, 79.4kHz to 104kHz
4x 176.4/192kHz, 158.8kHz to 208kHz
Bit Depth 24‑bit resolution
Latency Total latency is less than 800μs (measured
from analog in to analog out).
Cable Length, Cat-5e Maximum 400 feet (120 meters);
Use Unshielded Twisted Pair (UTP) cable
Input Impedance 3k ohms
Operating Level 0dB = +4dBu
Gain Range ‑14dB, ‑6dB, 0dB, +6dB
4‑position switch
Maximum Input Level +18dBu
Frequency Response
(at 48kHz)
‑3dB at 2Hz and 23kHz
± .5dB 3.0Hz–22kHz (at 1x sample rate)
THD +N <0.002% at ‑10dBFS
Crosstalk <100dB at 1kHz
Signal to Noise Ratio
(unweighted)
‑114dB