Barcus Berry 1460-N12 - Manual (Page 10)

down with a non-marring tool (e.g. a plastic screwdriver handle) to make
sure it is well seated. Re-string guitar.
NOTE: Before evaluating the amplified sound of the guitar, allow the instru-
ment to stand (with all strings tuned at a normal pitch) for a minimum of 24
hours. During the first day or two after the installation of any under-saddle
transducer, the output level can vary from one string to another until stress-
es in the saddle and bridge have equalized. Only then will the output of all
strings be properly balanced. If one or more of the strings delivers a weak-
er signal than the rest (after the min. 24 hour waiting period), the problem
is most likely an indication that the bottom of the saddle slot is uneven.
When replacing strings in the future, remove and replace only one string at
a time to assure maintenance of pressure on the bridge saddle.