Barcus Berry 1460-N12 - Manual (Page 14)

finger tight.
8) Remove the rod from the Fas-Jac
9) Place a 1/2” open end wrench or adjustable crescent wrench
over the end cap and tighten the cap while holding the body of
the Fas-Jac with a screw driver inserted into the slot end of the
Fas-Jac.
Wire to
Transducer
Shielded
End Cap
Large
Hex
Nut
Guitar
Body
Guitar
Body
Dress
Washer
Ground
Wire
Dress
Washer
Threaded
Attachment
Small
Hex
Nut
Lock
Washer
Conductor
Wire (Tip)
Unused
Terminal
(Ring)