Checkline DT-209X - Manual (Page 41)

5. Time Synchronize - Synchronize time with host computer for generating
time stamping reports. To activate this feature click on time synchronize
or press ALT + T from the keyboard.
After the feature is activated you will notice the time and date window
showing the following message.
When synchronization is complete the window will return to the time and
date format.
6. Standard Memory block Indicator – shows the number of memory blocks
used in Standard mode (maximum of 24 memory blocks).
7. Average Memory Block Indicator – shows the number of memory blocks
used in Average mode. (Maximum of 30 memory blocks).
8. Time and Date Window – displays time and date of measurements.
9. Programmable analog output - +1 V analog output from the tachometer
can be scaled to match a specific application (Example: Chart recorders,
comparator signals).
Table of maximum values for each unit selection
37