Checkline TI-UMX2 - Manual (Page 14)

– 14 –
Transducer Connectors
The transducer connectors and single control button are located on the top end cap of the
TI-UMX2. The transducer connectors are a special underwater Lemo “00”.
noTe: There is no polarity associated with connecting a dual element transducer. If
a฀single฀element฀membrane฀style฀is฀connected,฀the฀dongle฀‘must’฀be฀plugged฀into฀the฀
connector฀labeled฀in฀the฀diagram฀above,฀in฀order฀for฀the฀TI-UMX2฀to฀‘auto฀identify’฀the฀
single element probe type.
Single Control Button
The special magnetic reed found on the top end cap, provides single button operation.
Using this button and 3 basic press sequence options, the user can power the TI-UMX2
on/off,฀enter฀the฀menu฀options,฀and฀change฀settings.
Probe Zero Disk (bottom outside end cap)
The TI-UMX2 is equipped with an Auto Zero, which eliminates the user from having
to฀manually฀perform฀a฀zero฀on฀a฀speciied฀zero฀standard.฀However,฀a฀Manual฀Zero฀
option has also been included with the TI-UMX2. This provides the user with the ability
to฀reset฀the฀internal฀zero฀used฀for฀the฀auto฀zero฀as฀a฀reset฀option.฀Other฀than฀for฀the฀
purposes of a safety mechanism, the Auto Zero feature will be used.
– 43 –
1. Click on any of the measurement cells to review the gauge settings and waveform
for that specific measurement.
2.฀฀ Click฀in฀the฀any฀of฀the฀‘white฀space’฀text฀ields’฀to฀enter฀required฀information฀for฀
reporting purposes. If the file is then saved, the information entered will also be
saved with the file.
noTe: Although the TI-UMX2 is not equipped with a screen to view an actual
live฀A-Scan฀waveform,฀a฀‘snapshot’฀of฀the฀waveform฀is฀captured฀for฀each฀and฀every฀
measurement saved. These waves can be opened and reviewed in
DataComm at
any time. They can provide valuable information, in reference to the quality of the
measurements.