Checkline TI-UMX2 - Manual (Page 3)

– 3 –
1.0 InTroduCTIon
The Electromatic Equipment Company model TI-UMX2 is an underwater ultrasonic
thickness gauge that measures with extreme versatility. It has the ability to
simultaneously measure coatings and material thicknesses while maintaining the ability
to locate pits, flaws and defects in the material. It can also use a combination of dual
and single element transducers, depending on the application requirements. Based
on the same operating principles as SONAR, the TI-UMX2 is capable of measuring
the thickness of various materials with accuracy as high as ± 0.001 inches, or ± 0.01
millimeters. The principle advantage of ultrasonic measurement over traditional
methods is that ultrasonic measurements can be performed with access to only one side
of the material being measured.
Electromatic Equipment Company maintains a customer support resource in order to
assist users with questions or difficulties not covered in this manual. Customer support
may be reached at any of the following:
Electromatic Equipment Company
600 Oakland Avenue
Cedarhurst, New York 11516
Telephone: 516-295-4300
Fax: 516-295-4399
Email: [email protected]
1.1 unpacking
Unpack the gauge and inspect it for any shipping damage. Notices of defect mustbe filed
immediately, in writing, at the latest within 10 days on receipt of the goods.
1.2 Complete Kit
The TI-UMX2 is shipped as a
complete kit and includes:
•฀ TI-TI-UMX2฀gauge
•฀ Probe/cable฀assembly
•฀ 4฀oz.฀bottle฀of฀coupling฀luid
•฀ NIST฀Calibration฀Certiicate
•฀ 2฀AA฀batteries
•฀ Operating฀instructions
•฀ Hard-plastic฀carrying฀case
– 54 –
17.0 WarranTy
The manufacturer warrants to the original purchaser that this product is of merchantable
quality and confirms in kind and quality with the descriptions and specifications thereof.
Product failure or malfunction arising out of any defect in workmanship or material in
the product existing at the time of delivery thereof which manifests itself within three
years from the sale of such product, shall be remedied by repair or replacement of such
product,฀at฀the฀manufacturer’s฀option,฀except฀where฀unauthorized฀repair,฀disassembly,฀
tampering, abuse or misapplication has taken place, as determined by the manufacturer.
All฀returns฀for฀warranty฀or฀non-warranty฀repairs฀and/or฀replacement฀must฀be฀authorized฀
by the manufacturer, in advance, with all repacking and shipping expenses to the address
below to be borne by the purchaser.
THE฀FOREGOING฀WARRANTY฀IS฀IN฀LIEU฀OF฀ALL฀OTHER฀WARRANTIES,฀
EXPRESSED฀OR฀IMPLIED,฀INCLUDING฀BUT฀NOT฀LIMITED฀TO,฀THE฀
WARRANTY฀OF฀MERCHANTABILITY฀AND฀FITNESS฀FOR฀ANY฀PARTICULAR฀
PURPOSE฀OR฀APPLICATION.฀ELECTROMATIC฀SHALL฀NOT฀BE฀RESPONSIBLE฀
NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR
NATURE,฀RESULTING฀FROM฀THE฀USE฀OF฀SUPPLIED฀EQUIPMENT,฀WHETHER฀
SUCH฀DAMAGE฀OCCURS฀OR฀IS฀DISCOVERED฀BEFORE,฀UPON฀OR฀AFTER฀
REPLACEMENT฀OR฀REPAIR,฀AND฀WHETHER฀OR฀NOT฀SUCH฀DAMAGE฀IS฀
CAUSED฀BY฀MANUFACTURER’S฀OR฀SUPPLIER’S฀NEGLIGENCE฀WITHIN฀
THREE฀YEARS฀FROM฀INVOICE฀DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation may not apply to you. The duration
of any implied warranty, including, without limitation, fitness for any particular
purpose and merchantability with respect to this product, islimited to the duration of
the foregoing warranty. Some states do not allow limitations on how long an implied
warranty lasts but, not withstanding, this warranty, in the absence of such limitations,
shall extend for three years from the date of invoice.
Every precaution has been taken in the preparation of this manual. The manufacturer, assumes no responsibility for errors
or omissions. Neither is any liability assumed for damages resulting from the use of information contained herein. Any
brand or product names mentioned herein are used for identification purposes only, and are trademarks or registered
trademarks of their respective holders.