Checkline TS2P - Manual (Page 2)

– 1 –
TABLE OF CONTENTS
1.0 Introduction ................................................................................................. 0 2
1.1 Delivery
1.2 Unpacking
2.0 Available Models.......................................................................................... 0 3
2.1 TS2 Models
2.2 TS2P Models
2.3 TS2H Models
2.4 TS2L Models
2.5 TS2B Models
3.0 Operating Procedures ................................................................................. 0 6
3.1 Mounting Arrangements
3.2 Connector Assignment
3.3 Initial Setup
3.4 Options
4.0 Internal Adjustment of the Sensors ........................................................... 0 8
4.1 ZERO Adjustment
4.2 GAIN Adjustment
5.0 Specifications ............................................................................................... 11
5.1 General Specifications
6.0 Maintenance & Service .............................................................................. 12
6.1 Cleaning
6.2 Care of the Rollers
6.3 Verification Interval
7.0 Warranty ......................................................................................................
!
WARNING
Tensions that exceed the tension range of the instrument by
more than 100% may cause permanent damage to the measuring
spring and must be avoided under any circumstances.
The device must not be operated in potentially explosive areas
and must not come into contact with aggressive substances.