Checkline DFX-7 - Manual (Page 19)

DFX-7 Ultrasonic Flaw Detector
15
LANGUAGE: Provides the user the ability to select different languages for the DFX-
7. Refer to page 129 for further info.
3.14 DATA – Menu
NEW: Allows the user the ability to create a new alpha numeric grid, or sequential
log file with auto identifiers. It is equipped with custom parameters, rows, and
columns depending on the user’s application reporting requirements. Refer to page
96 for further info.
EDIT: Gives the user the ability to change parameters of grid or sequential file
previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 114 for further info.
OPEN: This function provides the user with the ability to recall grids or sequential log
files that currently exist in memory, from a list of grids. Refer to page 116 for further
info.
CLOSE: Provides the user the ability to close a currently opened grid or sequential
log file. Refer to page 118 for further info.
DELETE ONE FILE: This function provides the user with the ability to delete one
individual grid or sequential log file from a list of multiple grids/files previously saved
in memory. Refer to page 111 for further info.
DELETE ALL DATA: This function provides the user with the ability to delete all files
currently stored in memory. Refer to page 112 for further info.
3.15 UTIL (utilities) – Menu
AUTO FIND: Automatically locates the detection point if the measurement is out of
the viewable display area, and automatically sets up the gauges scope settings.
Refer to page 71 for further info.
GAUGE: Gives the user the ability toggle the DFX-7 gauge type to either a flaw
detector, or a thickness gauge. Refer to page 3 for further info.
3.16 XFER (transfer) – Menu