ChemoMetec NC-200 - Manual (Page 23)

3 Key, LED indicator and PC control
991-0203 Rev. 1.1 Sep. 2012 9
3 Key, LED indicator and PC control
3.1 Interactive Controls
Figure 4 The front of the NucleoCounter NC-200
The figure above shows the front of the NucleoCounter NC-200. Two operational areas are
present:

Lid with cassette fixture behind

Run button and a Tri color status LED indicator
The lid is located in the first area where the sample, contained in a cassette is placed.
When the lid is opened, a cassette can be placed in the fixture.
The other area is where the Run button and LED indicator are placed. Once a protocol has
been selected in the software (see detailed description in the NucleoView NC-200 Help),
an analysis using this protocol can be performed by activating the Run button.
The LED indicator shows the status of the instrument.

Green - the NucleoCounter NC-200 is ready for next operation.

Red - the NucleoCounter NC-200 is busy.

Orange - the NucleoCounter NC-200 is not in connection with the NucleoView NC-
200 software.