COP-USA CD55HD - Manual (Page 15)

Operation Manual for Intelligent Speed Dome Camera
14
9600bps OFF ON
19200bps ON ON
5. Selection of the Terminal Resistor of the Dome Camera. As shown in Figure 2, JP is
the select switch of the 120 Ω terminal resistor on the bus RS485, on which
only one terminal resistor of the dome camera at the farthest end can be connected, while
the terminal resistors of other devices should be opened.
6. Shortcut control function
Preset Set Preset Call Preset
1 Reserved Twice Call Preset Open the menu
64 Close the menu Open the menu
90 Reserved Reserved
91 1080i/59.94(Initial setting) Run patro
92 720p/59.94 Scan limit to left
93 NTSC(CROP) Scan limit to right
94 NTSC(SQ) Reserved
95 1080i/50 Open the menu
96 720p/50 Stop scan
97 PAL(CROP) Auto scan
98 PAL(SQ) Reserved
99 Reserved Reserved
. The Installation of the System
1. The style of the Installation
1) Dimension of the Product
Figure 3
2) The Style of Installation
a) Wall Installation