COP-USA CD55HD - Manual (Page 6)

Operation Manual for Intelligent Speed Dome Camera
5
2.2.5.4 RETURN: to return to the SYSTEM SETUP menu.
2.2.6 RETURN: to return to the main menu.
2.3 DISPLAY SETUP
2.3.1 CAMERA ID: when it is set at ON, address of dome camera
appears on the screen such as “CAM 001”. The default setting
is ON.
2.3.1.1 DISPLAY: to ON/OFF the dome address.
2.3.1.2 POSITION: to set the position of dome address, there are
four positions to be displayed: TOP-L (top-left corner),
TOP-R
(top-right corner), BOTT-R (bottom-right corner) AND
BOTT-L (bottom-left corner).
2.3.1.3 RETURN: to return to the DISPLAY SETUP menu.
2.3.2 ANGLE DISPLAY: to enter the angel display submenu.
2.3.2.1 DISPLAY: to ON/OFF the angle display. ONEPUSH singly
displayed, auto disappeared in 4 seconds.
2.3.2.2 POSITION: to set the display position of the angle:
TOP/BOTTOM.
2.3.2.3 RETURN: to return to the DISPLAY SETUP menu.
2.3.3 PRESET LABEL: to enter the PRESET LABEL submenu.
2.3.3.1 DISPLAY: to ON/OFF the display of the preset label. If it
is ON, the preset label will be displayed on the left of the
monitor when the preset position is setting.
2.3.3.2 POSITION: to set the display position of the preset label:
TOP-at the top of the monitor, BOTTON- at the bottom of
the monitor.
2.3.3.3 RETURN: to return to the DISPLAY SETUP menu.
2.3.4 DOME LABEL: to enter the DOME LABEL submenu.
2.3.4.1 DISPLAY: to ON/OFF the display of the dome label.