COP-USA CD55HD - Manual (Page 7)

Operation Manual for Intelligent Speed Dome Camera
6
2.3.4.2 POSITION: to set the display position of the dome label:
TOP-at the top of the monitor, BOTTON- at the bottom of the monitor.
2.3.4.3 RETURN: to return to the DISPLAY SETUP menu.
2.3.5 RETURN: to return to MAIN MENU.
2.4 CAMERA SEUP: If setting camera parameter is N/A, it
Me ansthe camera can not support this function.
2.4.1 D-ZOOM: to ON/OFF the digital zoom.
2.4.2 DISPLAY: to ON/OFF the display of the camera information.
2.4.3 FOCUS MODE: NON: iris & focus invariably / A-AUTO:
Auto iris / F-AUTO: Auto focus / AF-AUTO: Auto iris and
focus.
2.4.4 ICR: to set the AUTO/DAY/NIGHT situation.
2.4.5 BLC: to ON/OFF the back light compensation.
2.4.6 L-SYNC: to ON/OFF the external synchronization. (Only for some special cameras.)
2.4.7 SLOW SHUTTER: frame accumulation with two options Manual/Automatic. When
camera screen is opened under automatic state, ASS displays on screen. (Only sony
camera has this function)
2.4.8 WB/AE SETUP.
2.4.8.1 AE MODE: to set the automatic exposure to
MANU/AUTO/SHUTTER mode; SHTTER: it is only
available at the AE MODE is SHUTTER.
2.4.8.2 WB MODE: to set the white balance mode: ATW / MANUAL /
AUTO / INDOOR / OUTDOOR / ONEPUSH;
R GAIN: it is only available for plusing red at the WB MODE
Is MANUAL.
B GAIN: it is only available for pulsing blue at the WB MODE
is MANUAL.
2.4.8.3 WDR MODE: to ON/OFF the Wide Dynamic Range mode.
2.4.8.4 EXPCOMP SETUPexposure-compensation.
2.4.8.5 EXPCOMP: exposure-compensation.