COP-USA NVMS 1000 - Manual (Page 20)

17
NVMS-1000 User Manual
 Motion Detection Alarm Settings
Click “Area and Sensitivity” under Motion Detection
Alarm Setting to enter the interface.
① Drag slide bar to set the sensitivity value. The
higher the value is, the more sensitive it is.
② Click ―Erase‖/ ―Add‖, then hold press ―Ctrl‖ and
left click mouse to delete /add the area you want.
③ Click 【All】/【Reverse】/【Clear All】 button to
select area or clear all the area quickly.
Click “Set Motion Alarm” under Motion Detection
Alarm Setting to enter the interface .
Note: Please refer to the user manual of the device for
device linkage configuration.
Click “System Trigger” under Motion Detection Alarm
Setting to enter the interface.
Under the system linkage, check ―Trigger to Play Audio
File‖. If the motion alarm of a certain channel is
triggered, there will be given out a sound like ―beep‖.
Click 【Trigger the Big Screen】 button to select channel.
If the motion alarm of the selected channel is triggered, a big picture will pop up on the screen.
Click 【Trigger the Record Channel】 button to select channel. If the motion alarm of the selected channel is
triggered, the channel’s record will be opened automatically.