COP-USA NVMS 1000 - Manual (Page 23)

20
NVMS-1000 User Manual
4 Group and Scheme Setting
In the interface of control panel, click “Group and Scheme Setting” to enter the interface. Please refer to the
below picture:
4.1 Create, Change or Delete the Camera Group
In the above interface, click
button to create a group.
Select a group in the group list, click button
to delete it.
Select a group and click button to enter the
interface as shown on the right. You can change the
group name and dwell time interval in this interface.
4.2 Add or Remove the Camera Group
① Select a group and click button to enter
the interface. Then click “Add or Remove the
Camera Group” to pop up the window as shown
on the right.
② Check cameras on the left and click button