COP-USA DVRC264-4CH_USB - Manual (Page 148)

Digital Video Recorder User Manual
19

NULL: No area will be detected.

BACK: Go back to Motion Alarm Configuration menu.
Fig3.11 Detection Area Setup
Substeps of manually selecting the detection area are described as below:
1.
In the Area Setup submenu, press "Up" and "Down" buttons to choose "CUSTOM" option.
2. Press "Enter" key to confirm the operation.
3. Press "Up", "Down", "Left" and "Right" buttons to choose the part which needs to be detected.
4. Press "Enter" key to select or cancel the part.
5. Press "Esc" button to confirm the option and exit "CUSTOM" option.
STEP3 Press "BACK" option to go back the Motion Alarm Configuration menu.
Notice: In Continuous recording mode, Manual Record and Alarm Record are activated at the same time. If the Alarm Record occurs, the DVR
remains recording continuously. You can find the alarm event through ‘3.3.2 Search’ function of ‘3 Search by Event’.
9. COPY TO
You could copy the setting of this channel to any other selected channel.
SENSOR ALARM
Sensor alarm submenu is shown as Fig3.12 Sensor Alarm Configuration. Every Sensor matches one or more channel.