COP-USA DVRC264-4CH_USB - Manual (Page 187)

Digital Video Recorder User Manual
58
Fig4.16 Software Update
STEP3 After update finishing, DVR need to be rebooted to apply the new firmware.
LOAD DEFAULT
Load default setup.
SYSTEM INFORMATION
It displays the information of the DVR, such as version, DVR name and MAC address and so on.
SYSTEM LOG
It displays the information about operating information on the DVR.
4.5 Remote PTZ
PARAMETERS
Before operating the Remote PTZ, you should set the PTZ configuration. PTZ Configuration window is shown as Fig4.17
PTZ Configuration.