Cub Cadet 300 Series - Manual (Page 33)

AUGER SYSTEM
29
Auger Housing disassembly: Pulley removal
1. Remove the bolt that holds the auger pulley to the impeller
shaft using a 1/2” wrench. See Figure 4.15.
NOTE: The auger brake may need to be moved over briefly
to clear the pulley.
2. Pull the auger brake clear of the pulley.
3. Inspect the brake spring idler bracket and idler pulley for
wear or damage. See Figure 4.16.
Figure 4.15
Auger pulley
Figure 4.16