Cub Cadet 300 Series - Manual (Page 42)

AUGER SYSTEM
38
NOTE: There is a lube port on the top of the transmission.
See Figure 4.33.
• The transmission contains Alvania EP grease (part number
737-0168A, 8 oz. tube), though it should not need to be re-
filled in normal operation.
NOTE: The components of the gear box are:
• The impeller shaft with a worm gear.
• 20T helical gear
• A flange bearing and thrust bearing
positioned behind the worm gear
• .25” OD x 1.25” LG dowel pin
• Oil seal towards the rear of the gear box
Figure 4.33
Figure 4.34
Housing halves
Washers
Bronze gear and key
Auger shaft
Impeller shaft /
Worm gear
Thrust
collar
bearing
Bearing
Seal