Control jack vc pattern change, Current step led blink, Output led blink – Delptronics Trigger Man User Manual
Page 16: Trigger man user manual
Trigger Man User Manual
V2
16 of 20
Control Jack VC Pattern Change
LED 6 determines when the pattern changes if the Control jack is set to VC C/S/Pattern and the module
is in Pattern Play mode.
6
On First Step: The currently playing pattern, as determined by the voltage on the Control jack,
changes on the first step. Voltage changes during the playing of the sequence are ignored.
Immediate: The currently playing pattern changes immediately in response to the voltage on the
Control jack. The current step does not reset to the first step when that happens, the pattern
changes right away. Immediate changes to the currently playing pattern can produce chaotic
results, which may or may not be desirable.
Current Step LED Blink
7
Off: The currently playing step will not be indicated by the Step LEDs.
On: The currently playing step is indicated by a blink of the corresponding Step LED. If the LED is
off, it will briefly blink on. If the LED is on, it will briefly blink off. Some users find the step blink
distracting, while others find that it provides valuable information.
Output LED Blink
8
Off: The Output LEDs will not blink.
On: The Output LEDs will blink when there is a trigger/gate signal on the corresponding jack. If
the LED is off, it will briefly blink on. If the LED is on, it will briefly blink off. Some users find the
output blink distracting, while others think that it looks cool.