Doepfer Regelwerk (device no longer available) - Manual (Page 23)

Doepfer Musikelektronik GmbH User manual V1.0 REGELWERK V1.2 ❱ ❲ ❳ ❨
−
(7) Key Param.
MuteValue:
−
The data value which enables Mute
DemuteValue::
−
The data value which enables Unmute
SwitchMode:
−
Selecting which of the two modes
(momentary or toggling) the switches are set
for.
−
(8) Fader Mode
To switch from sequencer or edit mode into
fader mode, and switch the LCD readout to a
sort of MIDI event monitor
−
(9) Special Function
HookMode: Off / On
Enable / disable 'hook mode'
Threshold
Set the threshold for 'hook mode'.
Overdup: Off / On
Enable / disable 'overdub' mode
MIDILock: Off / In1 / 2 / 1 and 2
Enable / disable either or both MIDI inputs
Sample / Sek.:
Global 'refresh' rate for all faders (from 8 to 24
samples per second).
−
(10) String Edit
faderXXX Edit Name
NoName! Make? > OK
Editing page for giving faders names (eg VCF1
cutoff).
EditString: Pres
EditString: Start
EditString: Stop
EditString: Cont
EditString: Rew.
EditString: Forw.
Editing page for data strings for a given function
or button.
−
(11) Edit Tools
COPY Event type / value between two locations
Copying function, for duplicating the most
important data and pasting wherever required.
−
(12) Snap Tools
Get SnapShot
Store Snap:
Delete Snap:
Snapshot function management page