Doepfer Regelwerk (device no longer available) - Manual (Page 44)

Doepfer Musikelektronik GmbH User manual V1.0 REGELWERK V1.2 ➞ ➞ ➟ ➟
−
Start the current sequence playing. (This message will be followed with Timing Clocks).
•
11111011 Continue
−
Continue at the point the sequence was Stopped.
•
11111100 Stop.
−
Stop the current sequence.
•
11111101 Undefined.
• 11111110 Active Sensing.
−
Use of this message is optional. When initially sent, the receiver will expect to receive another
Active Sensing message each 300ms (max), or it will be assume that the connection has been
terminated. At termination, the receiver will turn off all voices and return to normal
(nonactive sensing) operation.
• 11111111 Reset.
−
Reset all receivers in the system to power-up status. This should be used sparingly, preferably
under manual control. In particular, it should not be sent on power-up.
Other information:
To get your copy of the 1.0 spec, send a $2 check to:
International MIDI Association
5316 West 57th Street
Los Angeles, CA 90056
(415) 321-MIDI
Make your checks payable to the IMA. BYW, the 1.0 spec is technically
identical to the .06 spec, but the description has been re-written.
Since the spec has been officially approved, there shouldn't be any
problem with posting this summary of the .06 spec:
[This document is Dave Oppenheim's current version of the MIDI file
specification, as sent to those who have participated in its
development. The consensus seems to be to submit this to the MIDI
Manufacturers' Association as version 1.0. I apologize for any loss of
clarity that might have occurred in the conversion from a Microsoft Word
document to this pure text file. I have removed some of the discussion
about recent changes to the specification in order to keep the file size
reasonable.--Doug Wyatt]