Doepfer MCV24 Midi CV/Gate/Sync Interface (device no longer available) - Manual (Page 14)

MENU C (LFO & ADSR PARAMETERS)
This menu controls the internal LFO and envelope generators per output.
LFO FUNCTION
This switches the LFO on or off for the selected output. When switched on the following parameters
are available. When switched off, the LFO parameter menu is suppressed.
LFO WAVE
The LFO has 5 main basic waveforms, Linear Triangle/Sawtooth, Rectangle (pulse), Sine, Random
(analogue) and Random (digital). These basic waveforms are controlled by the Ratio parameter, which vary
the waveforms beyond these basic shapes. (see Ratio parameter).
The Random (Analogue) waveform produces a waveshape similar to an analogue noise generator
having random amplitude and random pulse lengths. The Random (Digital) produces random pulse lengths,
but always at full amplitude.
LFO SYNC
The LFO Sync function determines if the internal clock speed is used (Intern), or a division of the MIDI
clock (MidiClock) is to be used for the LFO.
LFO FREQUENCY COURSE (LFO Sync = Intern)
When the LFO Sync is set to Internal, this parameter controls the speed of the LFO. Each value relates
to 1Hz, so in the example shown above, the speed is 6Hz. The range is form 000 to 019. The following
parameter (Frequency Fine) adds to this value.
<-C--- - > : O u t p u t 0 1
LF O & A D S R P a r a m
LF O : O u t p u t 0 1
fu n c t i o n : O n > >
LF O : O u t p u t 0 1
Wa v e : L i n : T r i / S a w
LF O : O u t p u t 0 1
Sy n c : I n t e r n
LF O : O u t p u t 0 1
Fr e q ( c o a r s e ) : 0 0 6