Crestron electronic Isys TPS-3100L - Manual (Page 33)

ISYS ® WALL MOUNT TOUCHPANELS
Isys ® G-Series 12" Wall Mount Touchpanel w/QuickMedia TM
TPS-12G-QM-L
Isys ® G-Series Wall Mount Touchpanels
Ethernet
10BaseT/100BaseTX, auto-switching, auto-negotiating, full/half
duplex, TCP/IP, UDP/IP, CIP, IEEE 802.3U compliant
Video/RGB 2
Signal Types: RGB and auto-detecting composite, S-Video, or
component video
Formats: SDTV 480i (NTSC) & 576i (PAL), EDTV 480p & 576p,
HDTV 720p & 1080i; RGB(VGA) up to UXGA 1600 x 1200
Color Depth: 24-bit, 16.7M colors
Features: Dual-window each scalable to full-screen, time base
correction, gamma correction, line doubling, motion adaptive
deinterlacing, reverse 3:2/2:2 pulldown
Audio 2
Hardware Features: Built-in microphone and biamplified speakers,
stereo headphone output, internal volume control and audio mixer
Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate
D-A Conversion (QM): 24-bit, 48 kHz
Amplification: Biamplified, mono, 5 Watts for high-frequency,
5 Watts for low-frequency
Buttons
(4) Backlit “softkey” buttons, programmable
(1) Backlit hard reset button, reboots the touchpanel
Connectors
QM IN 1: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable under system control as:
(1) RGB input with stereo program audio and (2) mic channels, or
(1) Auto-detecting component (YP
B P R ), S-Video (Y/C),
or composite video input with stereo program audio
and (2) mic channels;
RGB Format: RGBHV
RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600
x 1200 maximum (60 Hz limit at 1600 x 1200);
Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p
and 1080i;
Horizontal Frequency: 15 to 100 kHz
Vertical Frequency: 50 to 85 Hz
Delay Skew Compensation: 0 - 22 nS
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length: 450 ft (aggregate distance from
QM origination)
QM IN 2: (1) 8-wire RJ45 female, QuickMedia input port
Signal Types: Dynamically configurable under system control as:
(1) RGB input with stereo program audio and (2) mic channels, or
(1) Auto-detecting component (YP
B
P
R
), S-Video (Y/C),
or composite video input with stereo program audio
and (2) mic channels;
RGB Format: RGBHV
RGB Input Resolution, Non-interlaced: 640 x 480 minimum to 1600
x 1200 maximum (60 Hz limit at 1600 x 1200);
w
a
ll mount touchpanels
Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p
and 1080i;
Horizontal Frequency: 15 to 100 kHz
Vertical Frequency: 50 to 85 Hz
Delay Skew Compensation: none
Connects to QM output port of a QM-TX or other QuickMedia device
via CresCAT-QM or CresCAT-IM cable;
Maximum Cable Length (Video/HDTV): 300 ft (aggregate distance
from QM origination);
Maximum Cable Length (RGB @ 60Hz): 216 ft for 640x480, 140 ft for
800x600, 84 ft for 1024x768, 70 ft for 1280x768, 30 ft for 1600x1200
(using CresCAT-QM or CresCAT-IM cable)
QM OUT 1: (1) 8-wire RJ45 female, QuickMedia output port
containing RGB (same as touchscreen), WAV file audio, and internal
microphone signals;
RGB Format: RGBHV
RGB Output Resolution, Non-interlaced: 800 x 600 pixels @ 60Hz
Connects to QM input port of any QuickMedia device via
CresCAT-QM or CresCAT-IM cable
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 12mW per channel
Minimum Impedance: 32 ohms
RS-232: (1) 6-pin RJ11 female
Computer console, touch output, or mouse/touch input port
1
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
LAN: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet activity
24VDC: (1) 2.1mm barrel DC power jack
24V DC power input (power supply sold separately)
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port, connects to Cresnet control network
USB: (2) USB Type A female
USB 1.1 ports for mouse or touchscreen input
1
GND: (1) 6-32 screw, chassis ground lug
MEMORY EXP.: (1) Type II Compact Flash card slot
For memory expansion
PC CARD A – B: (2) Type II PC Card slots
(reserved for future applications)
1
Power Requirements
24VDC: 50 Watts (2.08 Amps) @ 24 Volts DC (PW-2420RU power
supply sold separately)
Cresnet Power Usage: 50 Watts (2.08 Amps @ 24 Volts DC)
Note: Power should only be applied to the 24VDC power jack OR the
NET port, not both.
> continued
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
91