Crestron electronic Isys TPS-3100L - Manual (Page 38)

Dimensions
Height: 13.81 in (35.06 cm)
Width: 16.98 in (43.11 cm)
Depth: 3.84 in (9.74 cm)
Weight
13.4 lbs (6.10 kg)
INCLUDED ACCESSORIES
(See individual product specifications for complete information.)
TPMC-L-IMC
Power Interface Module
PW-1280RU
Power Supply
1 See Web site or contact Crestron for a current list of compatible devices
and embedded applications. To ensure reliable performance, new device
drivers and applications are available only from Crestron through firmware
updates.
2 One or more QuickMedia devices are required to facilitate the input and
output of audio, video, and RGB signals. See the “MediaManager” section
of this catalog or visit the Crestron Website for more information about
QuickMedia.
ISYS ® WALL MOUNT TOUCHPANELS
TPMC-17-QM-L
Isys i/O TM 17" Wall Mount Touchpanel Media Center w/QuickMedia™
Isys i/O TM Wall Mount Touchpanel Media Centers
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
QM OUT 1: (1) 8-wire RJ45 female, QuickMedia output port
containing RGB output with stereo audio from internal PC and (2)
discrete channels from internal mic;
RGB Format: RGBHV
RGB Output Resolution, Non-interlaced: 1280 x 768 pixels @ 60 Hz
Connects to QM input port of any QuickMedia device via
CresCAT-QM or CresCAT-IM cable
HEADPHONES: (1) 3.5 mm TRS mini phone jack
Output Power: 105 mW per channel
Minimum Impedance: 8 ohms
USB: (2) USB Type A female, USB 1.1 ports for mouse, keyboard,
and storage devices
1
RS-232: (1) 6-pin RJ11 female, computer console port
Bidirectional RS-232 up to 115.2k baud
Hardware and software handshaking support
PC CARD A – B: (2) Type II PC Card slots for memory expansion,
project upload, and wireless NIC
1
ETHERNET: (1) 8-wire RJ45 with 2 LED indicators
10BaseT/100BaseTX Ethernet port
Green LED indicates network speed
Yellow LED indicates Ethernet activity
NET: (1) 4-pin 3.5mm detachable terminal block
Cresnet Slave Port (data only; 24V terminal not used)
Connects to Cresnet control network
PWR: (1) 4-pin DC power jack, 12.5V DC power input
(external power supply included)
PWR OUT: (1) 4-pin DC power jack
Connects to PWR jack using 9-inch 4-pin DC power patch cable
(included) when locating power supply remotely; passes 12.5V DC
power from PWR IN terminal blocks
PWR IN: (2) 2-pin detachable terminal blocks, paralleled
Used to extend power cabling up to 60 feet using 4 conductor,
14 AWG wire connected to a TPMC-L-IMC power interface module
(included) at remote power supply location
G: (1) 6-32 screw, chassis ground lug
Power Requirements
TPMC-17-QM-L: 8.4 Amps @ 12.5 Volts DC
External Power Supply (included): 2.2 Amps @ 100–250 Volts
AC, 50/60 Hz
Cresnet Power Usage: 0 Watt @ 24 Volts DC
Environmental
Temperature: 50° to 113°F (10° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Construction: Metal, flush mountable, 9U 19" rack-mountable
(all mounting kits sold separately)
Front Bezel: Injection-molded plastic; black w/silver or white
w/gray accent
w
a
ll mount touchpanels
96