Elektron Analog Rytm - Manual (Page 17)

THE USER INTERFACE
9
THE USER INTERFACE
The LCD screen shows all the information needed for real-time interaction and editing on the Analog Rytm. The
eight DATA ENTRY knob parameters shown will vary depending on the given situation. The main interface
screen is shown below:
1. Bar showing the main volume setting of the active track. Turn LEVEL knob to change.
2. The current tempo shown with one decimal.
3. The playback/recording status of the sequencer shown with the standard “record”, “play”, “pause” and
“stop” symbols; , , and . To the right is a counter displaying how many bars, beats and steps the
sequencer has played.
4. Shows the current PARAMETER page name.
5. Eight track parameters. They show what the DATA ENTRY knobs control and their current parameter val-
ues. Press and turn a knob to adjust its parameter in larger increments.
6. The active pattern.
7. The active kit. When turning a DATA ENTRY knob, the full name of the parameter is shown here. When the
active track is changed, the name of the track Sound is briefly shown.
SCREEN NAVIGATION
When entering a menu or sub-menu, navigation is done using the [ARROW] keys [UP], [DOWN], [LEFT] or
[RIGHT]. The LEVEL knob can be used to quickly scroll through menus and lists.
[YES/SAVE] is used to affirm, select, enter sub-menus and tick/untick boxes.
[NO/RELOAD] is used to negate, deselect or go back one or more steps.
• When on a menu or sub-menu the [NO/RELOAD] key can be used to go back, one step at a time,
all the way to the main screen.
PARAMETER EDITING
The DATA ENTRY knobs are used to change the value of the track parameters. The position of the parameters
on the LCD screen correspond to the physical location of the knobs on the front panel.