Elektron Analog Rytm - Manual (Page 26)

PROJECTS
18
SAVE PROJECT opens a project selection screen where you choose a slot to save the active project to.
PROJECT MANAGER launches the PROJECT MANAGER menu. Selecting a project in this menu and press-
ing the [RIGHT] arrow key will bring up a list of commands.
CLEAR resets the project slot to a clean state.
DELETE removes the project from the slot.
RENAME opens a screen where you can rename the project file.
LOAD FROM loads the selected project. This will overwrite the active project!
SAVE TO saves the active project to the selected slot.
TOGGLE toggles write protection on or off. Write protected projects can not be overwritten,
renamed or erased. A write protected project is shown with a lock symbol.
INIT NEW initializes an empty file slot with a clean project. This operation is only available for
empty project slots.
• Multiple projects can be selected and deselected by highlighting them and pressing [YES/SAVE].
• The currently active project is linked to the slot shown with a small arrow in front of the project
name.
• A lock symbol indicates the project is write protected.
• Projects can be copied/cleared/pasted.
• LOAD FROM in the PROJECT MANAGER will overwrite the active project. Be sure to save your
project before you load another.