Elektron Monomachine - Manual (Page 109)

GLOBAL SETTINGS
101
5. When all waveforms have been sent to the Monomachine, press [EXIT/NO]. “WRITING
WAVEFORMS” will be displayed on the screen. The transfer is now complete.
• If the waveforms sent to the Monomachine are newly made, after being converted
to a syx file in C6, they will be stored starting from position 1 when using the ORG
method of receival. The rest of the waveforms will be stored in the following posi-
tions in the order they were converted.
To receive a single waveform, or a batch of waveforms, follow the instructions below.
1. First of all, make sure that the MIDI cables are properly connected. The MIDI OUT of the
sending device should be connected to the MIDI IN port of the Monomachine. To send
waveforms from a computer you can use our free C6 program, found on the Elektron
homepage. If loading a wav or aiff file, don’t forget to convert it to a DigiPRO syx file in
C6 before sending it.
2. When in the DIGIPRO MGR, choose RECEIVE and then press the [RIGHT] arrow key to
move the focus to the POS NAME column. Place the focus on the position you want to
store the waveform or waveforms by using the [UP] and [DOWN] keys.
3. Press [ENTER/YES] to make the Monomachine ready to receive waveforms. The dis-
play will show “WAITING...”
4. Send the waveform/s to the Monomachine. A counter on the display will show how many
and to which position the waveform/s have been received. If you send just one wave-
form, it will be stored at the chosen position. If you send several waveforms, they will
stored in the order they are sent, starting from the chosen position.
5. When all the waveforms have been sent, press [EXIT/NO]. “WRITING WAVEFORMS”
will be displayed on the screen. The transfer is now complete.