Elektron Monomachine - Manual (Page 116)

GLOBAL SETTINGS
108
RENAME will rename the selected Digibank. A Digibank name can contain a maximum of
8 characters.
ERASE will erase the selected Digibank.
LOCK will lock the Digibank. When a Digibank is locked it is not possible to overwrite,
rename or erase it. Waveforms in the bank are protected and can’t be overwritten or
renamed. A locked Digibank is indicated by a lock symbol in the lower right side of the
menu window.
UNLOCK reverts a locked Digibank to the default, unlocked, status.
• Copy/Clear/Paste commands are available in the DIGIBANK MANAGER menu.
Warning! No Undo command is available in this menu.
• For faster scrolling in the Digibank list, hold down the [FUNCTION] button and
press the [UP]/[DOWN] arrow keys.
• It's possible to copy DigiPro user waveforms between Digibanks. Open the
DIGIPRO MGR in the FILE menu. Select the user waveform you want to copy and
press [FUNCTION] + [REC] to copy it. Load a new Digibank. Enter the DIGIPRO
MGR, select the position to which you want to paste the user waveform. Press
[FUNCTION] + [STOP] to paste the user waveform. No undo function is available
here. Factory waveforms are not possible to copy.
MIDI SEQ
Here relevant settings for the MIDI sequencer are found.
MIDI SEQ SETTINGS
The MIDI channels and CTRL-change parameters used per channel is set in this menu.
1. Select the MIDI SEQ in the GLOBAL menu. Then select MIDISEQ SET using the
[ARROW] keys and press [ENTER/YES].
Use the [ARROW] keys for navigating in the window. Use LEVEL to update the parame-
ters.
TRK (track) is the MIDI sequencer track you are about to edit.