Elektron Monomachine - Manual (Page 89)

MONOMACHINE ROUTING
81
MONOMACHINE ROUTING
The Monomachine offers a flexible routing system for addressing the audio outputs, as well
as using the audio inputs and routing between the synthesis and FX machines.
Most of the routing is controlled from the EDIT KIT window. Please check section
“ASSIGNING A MACHINE TO A TRACK”, on page 22 for information on how to find, open
and manoeuvre it.
THE MONOMACHINE MIXER
The OUT BUS parameter in the MIX tab is available for all machines. It selects which mix
busses the track will be sent to. The Monomachine offers three stereo mix buses named
AB, CD and EF. At the end of the mix bus the sound is by default sent to the audio output
pairs AB CD and EF.
If no FX Machines are used the mix bus selection simply selects the audio stereo output(s)
the track will be sent to. In the example above the synthesis tracks are sent to different
audio outputs, so further external audio processing is possible for the individual tracks. The
third track is sent to two outputs.
THE FX MACHINES
The FX Machines works a little bit different compared to the synthesis machines as they do
not generate any sound themselves. They need to be fed sound in order to work as sup-
posed. The sound sources can either be the audio inputs, the sound of the previous track
or the audio coming from one of the mix buses.
4:/5)&4*4
4:/5)&4*4
4:/5)&4*4
4:/5)&4*4
4:/5)&4*4
4:/5)&4*4
5'9
5'9
5'9
5'9
5'9
5'9
.*9 .*9 .*9