Fire By Design VULCAN - Manual (Page 4)

4
Gas Requirements
Fuel Type – Before making gas connections ensure appliance being installed is compatible with the
available gas type. Check the label on the appliance to confirm appliance gas type requirement.
Gas Pressure – Proper input gas pressures are required for optimum appliance performance.
Gas Pressure Requirements
Electrical Requirements
Acceptable Input Voltages to Supplied 24 Volt AC Transformer
110 / 210 / 220 / 240 / 480 Volt AC
(Supplied 24 Volt AC Transformer compatible with all voltages listed above)
(Read label on supplied transformer for proper connection information)
Recommended Wire Size
12 gauge wire for all installations
Clearance from Combustibles
WARNING – FIRE RISK
Provide Adequate Clearance from Combustibles as shown below
Pressure Natural Gas Propane
Minimum
3.5” W.C. 8.0” W.C.
Nominal
7.0” W.C. 11.0” W.C.
Maximum
½ psi (14.0” W.C.) ½ psi (14.0” W.C.)
WARNING
The All Weather Electronic Ignition System operates on 24 Volts AC power ONLY
DO NOT Attempt to Power using 110 Volts AC Power – Damage WILL RESULT
2 ft.
8 ft.
2 in.
Vulcan
Fire
Module