FRITSCH PULVERISETTE 25/19 - Manual (Page 7)

Cutting mill combination „pulveristte19“ – „pulverisette 25“ page 4
3.5 Suction adapter assembly for p-19
Follow the same method while assembling this as in the sample splitter
assembly for p-25.
3.6 Suction unit assembly
The rack for the suction unit is positioned on the left next to the cutting
mills and the suction unit along with the cyclone pointing downwards is
placed into the circular opening on the mounting sheet. For easy disman-
tling and cleaning purposes, the suction unit is not fixed to the rack.
Slide the hose on to the metal supports on the suction unit and slide the
other end over the funnel below the p-19.
Screw on the sampling jar at the end of the cyclone, Caution: When us-
ing 1 or 2 liter jars, an adapter must be used.
3.7 Power connection
Connect all devices to the included junction box and plug in the cable to a
3-phase power point.
3.8 Switching on for the first time
Connect all devices and switch on one after the other (without cutting
tools) and check for proper functioning.
Refer to the Operating Manual of p-19 and p-25 to check the direction of
rotation of cutting mill blades.